VIKO Solution
Next-generation insulation technology

VIKO Solution Vacuum Insulation

Over 10 times the performance of conventional insulation

Our glass-fiber vacuum insulation dramatically improves both construction efficiency and living comfort.
With the world's only patented installation technology, it can be applied to any building.

8–11x insulation performance
Ultra-slim 20mm thickness
Lifespan of 25+ years
Globally patented technology

Performance comparison

Conventional insulation
1x
VIKO Solution vacuum insulation
8–11x

Thickness comparison

Conventional insulation200mm
VIKO Solution vacuum insulation20mm

About vacuum insulation

VIKO Solution's vacuum insulation is a next-generation building insulation made with a glass-fiber core.

Glass-fiber vacuum insulation is a next-generation insulation that delivers more than 8 times the thermal performance of conventional insulation.

What is VIKO Solution vacuum insulation?

A high-efficiency insulation that improves thermal performance 8–11 times or more over conventional insulation.
Inorganic core material is vacuum-sealed inside a high-barrier film envelope,
making it a next-generation insulation that minimizes heat transfer by convection.

《Envelope》

AL Foil (aluminum foil)
1st vacuum layer

AL Foil (aluminum foil)

+
Glass Fiber Cloth
2nd vacuum layer

Glass Fiber Cloth

PropertyStandard aluminum foilGlass cloth
Tensile strength (kg/㎟)
MD: 13.0
TD: 13.5
60.0
45.0
Burst strength (kg/㎟)
Inner → outer: 13.5
Outer → inner: 13.5
14.0
25↑

Glass cloth is 4–5 times stronger than standard aluminum foil,
and greatly improves the durability and performance of vacuum insulation.

Effect of replacing insulation

Measured as value per pyeong (≈ 3.3 m²) at the same thermal transmittance, replacing insulation with vacuum insulation adds value.

Comparison of insulation replacement effects

ReplacementThickness savedArea gainedAdded value
Styrofoam → Isopink (XPS)0.023 m0.25 pyeong
(≈ 0.83 m²)
KRW 7.5M
(≈ USD 5.6K)
Isopink (XPS) → vacuum insulation0.153 m1.9 pyeong
(≈ 6.3 m²)
KRW 57M
(≈ USD 43K)
PF board → vacuum insulation0.092 m1 pyeong
(≈ 3.3 m²)
KRW 30M
(≈ USD 22K)

(Same insulated area of 36.2m, assuming a sale price in Korea of KRW 30M (≈ USD 22K) per pyeong; USD at KRW 1,334 per USD, ECB reference rates of 2026-11-12)

VIKO Solution vacuum insulation

Highest efficiency

1.9 pyeong
Maximum area gained
KRW 57M
Maximum added value (≈ USD 43K)

Floor plan of the space gained

Floor plan showing the effect of replacing insulation

Building area: 84.99㎡, common: 30.41㎡, exclusive: 115.41㎡

Thickness at equal thermal transmittance (mm)

EPS (Styrofoam)184
XPS (Isopink)161
PF board100
VIP (vacuum insulation)10
Advantages of vacuum insulation
  • 10% of the thickness of conventional insulation
  • Real gain in usable area
  • Added value per pyeong

Area expansion

Other products take up a large share of the exclusive area with thick insulation. VIKO vacuum insulation delivers about 10 times the insulation performance with low thermal conductivity at just 12mm thick, so extended balconies can be used far more effectively.

Floor plan showing the area gained with VIKO Solution vacuum insulation

Floor plan of an 84A-type unit

Basis of comparison: energy-saving design standards for buildings, notified by the Ministry of Land, Infrastructure and Transport

Basis of comparison

MOLIT energy-saving
design standards for buildings

Effective window area versus the standard

(14.7M + 4.1M) × 0.17
= 3.196㎡ more
About 1 pyeong (≈ 3.3 m²)
Real gain in area
* MOLIT-certified design standard

Insulation thickness comparison

Conventional insulation200mm
VIKO Solution vacuum insulation15mm
* About 1/13 the thickness of conventional insulation

Space saved

185mm
(200mm - 15mm = 185mm saved)
= About 1 pyeong (≈ 3.3 m²) more area

Maximum use of space

94% thinner, leaving more room

Higher property value

Added value at KRW 30M (≈ USD 22K) per pyeong

Optimized extended balconies

Effective use of space at 12mm thick

Lifespan test results

Vacuum insulation contains a getter that absorbs gas and moisture.

Tests showed that a 500x1000 panel with 1 getter unit maintains a lifespan of 25 years.

Heat flux characteristics

The internal pressure of vacuum insulation rises slowly as outside air and moisture enter, and the internal absorbent keeps that pressure at a steady level (see the graph below for thermal conductivity by internal pressure).

Graph of thermal conductivity by gas pressure in vacuum insulation

Thermal conductivity by gas pressure for various insulation materials

Test conditions

Under standard conditions of 23℃/50% RH (EN) or 24℃/50% RH (ASTM), a lifespan of 25+ years is required

Thermal conductivity criteria

The service life of vacuum insulation is defined by thermal conductivity of at most 10mW/m·K under ISO-16478 and 11mW/m·K under ASTM C1484

Proven lifespan

25 yrs+

Guaranteed lifespan

Panel size500×1000
Getter content1 unit
Test result25+ years

Verified against international standards ISO-16478 and ASTM C1484

Technological innovation

VIKO Solution's innovation in vacuum insulation

VIKO Solution's vacuum insulation is recognized as the best insulation available today.

VIKO Solution Co., Ltd. holds the world's only patent for installing vacuum insulation.

Thin installation

Excellent insulation even at a relatively thin thickness, making the most of the building's interior space.

Lightweight and non-combustible

Its light weight puts no strain on the building structure. Lowering the building's total weight helps its load-bearing design.

Flexible and airtight

Made in many shapes and suited to many parts of a building. Manufactured without air, it is highly airtight and improves energy efficiency.

Durable, blocks thermal bridges

Performance does not degrade over time, lowering maintenance costs and keeping the building energy-efficient for the long term.

VIKO Solution vacuum insulation compared

VIKO Solution's vacuum insulation outperforms conventional insulation and other manufacturers' vacuum insulation under any conditions.

Compare the products to see the advantages of VIKO Solution vacuum insulation.

ItemEPS type 2 insulation
(Styrofoam)
XPS insulation
(Isopink)
Vacuum insulation
(VIP)
Thickness200 mm180 mm12 mm
Thermal conductivity0.031 ~ 0.034 W/mK0.029 W/mK0.0015 ~ 0.0016 W/mK
CharacteristicsVulnerable to fire, releases toxic gas (unsuitable indoors)
Insulation drops sharply by 30% when wet,
shape deforms or thermal conductivity rises
Aging requires installing
in two layers,
shape deforms or thermal conductivity rises
Fitted with patented brackets instead of glue,
so no harmful substances or gas
are released in a fire, and no deformation
DeformationShape deforms or thermal conductivity rises
due to outside conditions (weather, etc.)
Shape deforms or thermal conductivity rises
due to outside conditions (weather, etc.)
No deformation
Area-0.2 pyeong (≈ 0.66 m²) more area[For a 34-pyeong home] 1.9 pyeong (≈ 6.3 m²) more in an apartment,
2.84 pyeong (≈ 9.4 m²) more in a detached house

VIKO Solution patented products

Vacuum insulation mounting assemblies and installation methods using them

VIKO Solution's products are made for installation with vacuum insulation and designed for each location and condition, making any installation possible.

patent1

Keeper-Vac

patent2

Polyamide thermal break bar

patent3

V-I

patent4

V-King

patent5

V-I Amide

patent6

V-I Clip

patent7

V-F

patent8

U-shaped side molding